As per IP 31 the apparatus consists of Brass sleeve
and case with metal cup and a glass boiling tube with cork fitted to a bath.
600ml beaker is provided. The assembly is kept on heater with energy
regulator as per IP-132 the unit comprises a glass beaker with fibre cover
together with glass test tube with three indentations to receive chromium
plate brass cup. Cork for tube and a 1.5mm diameter brass rod the assembly
is kept on heater with energy
This type of cup been in popular use for many years
and confirms to is 3944-1965 specifications. These are available in
following sizes jet no. B-1, B-2, B-3, B-4, B-5 & B-6 with stand.
- Spare flow cup brass any size
As per IP 49, 50 &167 specifications and also
as per IS 1448.
- Penetrometer apparatus with container and weights having penetration
needle
- Penetrometer apparatus with container and weights having penetration
one hollow type
- Penetrometer apparatus with automatic time & electrical
arrangement with Brass cone
This apparatus is used for determination of water
content of asphalt bitumen and fluxed native asphalt, crude coal tar, road
tar, cut back bitumen, Digboi type cutback bitumen and creosote and
anthracene oil. The apparatus consist of one 10cc (ml) receiver, 500ml flask
and heater with energy regulator control
As per IP-91, 123 & IS-1448 specifications this
apparatus is used for determination of distillation characteristics of
petroleum products. These instruments consists of metal shield to support
distillation flask with geared height adjustable device. It has a slot for
vapour tube. A glass window in front side for clear view of inside objects.
It also has cooling bath or condenser with M.S. black painted stand.
Electrically heated the instrument is supplied with two square asbestos
boards with 50mm and 70mm holes (without heated the instrument is supplied
with two square asbestos boards with 50mm and 70mm holes (without glass
wares)
- Single distillation app. electrically heated with energy regulator
with gear device energy regulator with gear device
- Distillation app. for crude oil petroleum as IP-24 with one glass
condenser with energy regulator
This apparatus is suitable for determining the
close cup flash point of petroleum and mixtures according to IP-33 and
IP-170 and also IS 1448 (Part-I) 1985. It is suitable for oils whose flashes
below 70ºC. It is supplied with oil cup cover fitted with stirrer
thermometer socket S.S. water bath stand. An electric heater is fitted to
bottom for operation on 220v AC circuits.
This apparatus is made as per IP 34, ASTMD-93 and
IS 1448 (Part-1) 1270 (P-21) and IS 1209-1953 method B. The apparatus
consists of brass test cup with handle removable cup cover with spring
operated rotating shutter having oil test Jet/Gas test jet flame device,
stirrer with flexible shaft. The assembly rests in Air bath which is covered
with dome shape metal top. The cup is fitted with insulated handle and
locking arrangements near cup flenge. The assemble is kept on round shape
electric heater with temp regulator. Suitable for operation on 220 volts.
- Pen sky Martens Flash Point app. elect heated with energy regulator
oil test jet
- Gas test jet
