This is useful for continuous heating up to 350ºC. The body is made of P.C.R. sheet painted attractively with good stove enamel. Top rectangular cast iron plate has insulated elements. Work on 220/230V AC supply.

This unit is designed for flock information fest in water treatment plants with variable speed from 25 to 150 RPM 1/20 H.P. geared motor whole unit is mounted on mild steel housing with tube lights support by four support or 9½" height. S.Steel stirring peddle 1/3" are attached to rods 10" long ¼" dia motor with lifting knob at the top. Locking collars at stirring rods permits adjustments of paddle height spacing of 6" between rods, permits use of 1000 ml beakers arresting directly on bench. Complete with ON/OFF switch

Single walled complete S.Steel or Aluminum body, seamless. Electricity operated. Complete with M.S. Painted stand, pressure gauge-pressure release valve and safety valve to work on 220/230V AC single phase supply. Dia x Depth 300 x 300mm

Outer body made of thick mild steel finished oven baked enamel. Inner chamber will be thick stainless steel. The chamber is absolutely leak-proof and it can be operated at any selective point in between 5 to 20 pound/Sq. inch. The instrument is equipped with pressure gauge. Pressure release valve, safety valve, water level indicator and perforated S.S. basket complete with cord and plug. The lid is made of thick mild steel sheet duly lined with stainless steel with pedal lifting arrangements and radial locking devices to work on 220/230V AC single phase supply.

For conducting accelerated soundness test for cement complete with all accessories.

Suitable for Lab-Use Electric heated with Max Tap. 940ºC with working space of 10 depth x 9.50 cm dia. Provided with pyrometer & thermocouple in ceramic sheet in box to work on 220V AC. 10 cm x 9.5 cm.

Light weight with ceramic fiber wool insulation (instead of brick insulation). The outer costing is made of double walled thick P.C.R.C. sheet reattached with thick perforated sheet on the bottom portion, painted with attractive stove enamel. The distinct feature of perforated sheet is to prevent the temperature control unit from very high heat. Heating elements are made of KANTHAL A1 wire of coil form embedded on the muffle with high grade refectory cement and backed by high temperature cer-wool insulation which avoids loss of energy. These arrangements will ensure the most uniform kind of distribution of heat. The weight & size of furnace is of one quarter and 30% respectively as compared to brick furnace. A viewing cap is also provided on the door. Temperature control unit consists of energy regulator, fitted in front of furnace with two pilot lamps. The apparatus is complete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug to work on 220/230 V. The energy regulator dial is arbitrarily marked 0-100 position. This marking does not indicate temperature. It indicated control level i.e. at position 100 max. electricity is allowed to flow to furnace. Maximum temp.950ºC working temp.900ºC

Double walled , inner chamber made of grooved refractory fitted with Kanal -1 Heating coils to give maximum heat inside the chamber. The gap between the two chambers is filled with high density ceramic insulation which results the low heat loss. Provided with mains, main& heating indicator, energy regulator, thermocouple.

This unit is specially designed to meet the requirements of High Temperature, the casing is made of M.S. reinforced with iron angles duly painted, chamber made of Ceramic Zirconium Board and elements are placed Horizontally in the chamber. Heating is done by imported silicon carbide rods duly controlled by Accurate step down transformer (Air cooled), it saves energy upto 30% with easily replaceable carbide rods. These furnaces have outstanding temperature reliability and have large surface radiation ratio to enhance thermal efficiency and power consumption. Control panel is fitted with Digital Temperature Indicator cum Controller upto1600°C. Control panel is provided separately having ammeter and volt meter etc. Maximum furnace temperature upto 1450°C, working temperature up to 1400°C opera table on 220 Volts single Phase AC supply.

Laminar air flow cabinets able to create particle free air of Class-II standard. The cabinet is fabricated out of board with sun mica laminated exterior. The working table is made of thick board which is also sun mica at top. Laminar flow is based on principle of double filtration of air. Atmospheric air will be drawn through the pre-filters by heavy duty blowers. Filtered air than passed through highly effective HEPA Filters with 99.97% efficiency for particulates of 0.3 micron or larger, which can filter almost all air born contaminants such as dust, fungal spores, bacteria etc. Double filtered laminar flow air will blow horizontally/vertically through the working table at a nominal velocity or approx 90 Fts/min. Heavy duty blowers dynamically balanced with 0.25 HP electric motor are mounted on shock resistant base of cabinet or anti-vibration pads, operate on 230 +/- 10 volts, 50 Hz AC supply. Shadow less uniform lighting is provided within working space (100 feet candles). Unit will be mounted on caster wheel and supplied with high quality plug and cord.